Cabletron Systems SPECTRUM 1800 User Manual

Also see for SPECTRUM FRX6000: User guide Installation & setup guide User guide Reference guide User guide

Contents

Cabletron Systems SPECTRUM 1800 User Manual Manual pdf 211 page image

Speed Dial Configuration12-7SmartSwitch 1800 Voice ConfigurationValid values for the voice concentrator vary depending on the device type; thenumbers below relate to ACT Networks’ SDM network access devices.SDM:Digits 1-2= Switch number 01-61.Digits 3-4= Port number 00-15.Digit 5= Slot number 1-8 if FP or DX. Slot number 1-4 if JFP.Digit 6= Channel number 0-5 if DVC. Arbitrary (typically 1-6) if FP or JFP.Extended Dial StringThis is an extended set of digits that will be forwarded with the call if Ext. DigitsSource is set to Map in the Voice Configuration window (see Configuring VoicePorts, page 12-8). If Ext. Digits Source is set to User, any extended digits must beentered by the operator at the initiating device.Calls placed to a speed-dial number will go to the device (e.g., PBX) whose fullnumber is associated with that speed-dial number in the Voice Speed DialConfiguration window. If extended dial digits are included in the table or the call,the call will automatically be forwarded through the remote device to thetelephone number that matches the extended digits.Adding or Modifying Speed Dial NumbersFirst, access the Voice Speed Dial Configuration Window (see Speed DialConfiguration, page 12-5).To add a new Speed Dial Number:1. Enter the configurable values for each number.2. Click on to add your new entry.To modify an existing entry:1. In the list box, click to select the number you wish to modify. The selectedentry will be highlighted. (Note that you can only modify one entry at a time.)2. Edit the fields, as desired. If you make some changes, and would like to returnto the original values, click on the Refresh button.3. Click on to modify the selected entry.To delete an existing entry:1. In the list box, click to select the number you wish to delete. The selectedentry will be highlighted. (Note that you can only delete one entry at a time.)2. Click on to delete the selected entry.