Configuring BSCI Devices8-11BSC Interactive ConfigurationTransparent Text SupportIf Yes is selected, then all transmitted characters, including control charactersequences, are treated as data. This parameter is useful for transmitting binarydata and machine language computer programs without special coding.Data-link control character sequences transmitted this way must be preceded by aData Link Escape (DLE) character (a value of 10 in hex) in order to be recognizedas control characters.The default value for this parameter is No.Printer AttachedIf Yes is selected, the device has an attached printer; if No, it does not. The defaultvalue for this parameter is No.Adding or Modifying BSCI Device InformationTo add a new BSCI Device entry:1. Enter the Control Unit ID, the Device Unit ID, and the other configurablevalues for the entry.2. Click on to add your new entry.To modify an existing Device entry:1. In the list box, click to select the Device entry you wish to modify. The selectedentry will be highlighted. (Note that you can only modify one entry at a time.)2. Edit the fields, as desired. If you have made some changes but would like toreturn to the original values, click on the Refresh button.3. Click on to modify the selected entry.To delete an existing Device entry:1. In the list box, click to select the Device entry you wish to delete. The selectedentry will be highlighted. (Note that you can only delete one entry at a time.)2. Click on to delete the selected entry.Applying Port-level ChangesAfter you have made any port-level configuration changes, your changes will nottake effect until you have done an on-line update. To do so:1. Click mouse button 3 on the port you have been configuring to display the PortMenu.2. Drag down to On-line Update and release.
