The RSE system is capable of outputting audio tothe vehicle speakers by using the radio. The RSEsystem may be selected as an audio source on the radioif the RSE system power is on. Once the RSE systemis selected as an audio source on the radio, adjustthe speaker volume on the radio, if necessary. If theRSE system power is not on, the RSE system will notbe an available source on the radio. Refer to theradio information for the radio that your vehicle hasfor more information.Video ScreenThe video screen is located in the floor console. Lift upthe screen by the top or the sides into the full openposition. Adjust the screen’s position as desired. Whenthe video screen is not in use, close the screen.The DVD player and display will continue to operatewhen the screen is in the up or the down position. Thevideo screen contains the transmitters for the wirelessheadphones and the remote control. If the screenis in the closed position, the signals will not be availablefor the operation of the headphones and the remotecontrol.Notice: Avoid directly touching the video screen,as damage may occur. See “Cleaning the VideoScreen” later in this section for more information.DVD PlayerThe DVD player is located in the floor console under thedisplay. Flip up the display to access the DVD player.The DVD player can be controlled by the buttons on theDVD player and by the buttons on the remote control.See “Remote Control” later in this section for moreinformation.The DVD player power may be turned on when theignition is in ON, ACCESSORY, or when RetainedAccessory Power (RAP) is active.The RSE system DVD player is only compatible withDVDs of the appropriate region code for the countrythat the vehicle was sold in. The DVD region codeis printed on the jacket of most DVDs.The DVD player will also play audio CDs. Not all homerecorded CDs, CD-R or CD-RW formats, will play inthis DVD player.If an error message appears on the video screen, see“DVD Messages” later in this section.3-101
