Changes or modifications to this system by other thanan authorized service facility could void authorization touse this equipment.Universal Home RemoteSystem Operation (WithOne Triangular LED)If there is one triangular Light Emitting Diode (LED)indicator light above the Universal Home Remotebuttons, follow the instructions below.This system provides a way to replace up tothree remote control transmitters used to activatedevices such as garage door openers, security systems,and home automation devices.Do not use the Universal Home Remote with anygarage door opener that does not have the stop andreverse feature. This includes any garage door openermodel manufactured before April 1, 1982.Read the instructions completely before attempting toprogram the Universal Home Remote. Because ofthe steps involved, it may be helpful to have anotherperson available to assist you in the programmingthe Universal Home Remote.Keep the original hand-held transmitter for use in othervehicles as well as for future Universal Home Remoteprogramming. It is also recommended that upon the saleof the vehicle, the programmed Universal HomeRemote buttons should be erased for security purposes.See “Erasing Universal Home Remote Buttons” laterin this section.When programming a garage door, park outside ofthe garage. Park directly in line with and facingthe garage door opener motor-head or gate motor-head.Be sure that people and objects are clear of thegarage door or gate you are programming.It is recommended that a new battery be installed inyour hand-held transmitter for quicker and moreaccurate transmission of the radio-frequency signal.2-57
