Button And Automatic (Key Access default): If thefeatures are enabled though the Easy Exit Setup menu,the driver’s seat will move back, and if the vehiclehas the power tilt wheel and telescopic steering feature,the power steering column will move up and forwardwhen the key is removed from the ignition or afterpressing the easy exit seat button. The automatic easyexit seat movement will only occur one time afterthe key is removed from the ignition. If the automaticmovement has already occurred, and you put thekey back in the ignition and remove it again, the seatand steering column will stay in the original exit position,unless a memory recall took place prior to removingthe key again.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.Easy Exit SetupIf your vehicle has this feature, it allows you to selectwhich areas will recall with the automatic easy exit seatfeature. It also allows you to turn off the automaticeasy exit feature. See Memory Seat and Mirrorson page 1-6 and “Easy Exit Recall” earlier for moreinformation.Press the customization button until Easy Exit Setupappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Thenpress the menu up/down button to scroll through thefollowing settings:Off: No automatic seat exit will recall.Seat Only: The driver’s seat will recall.Tilt Only: The steering wheel tilt feature will recall.Telescope Only: The steering column telescopefeature will recall.Seat/Tilt: The driver’s seat and the steering wheel tiltfeature will recall.Seat/Telescope: The driver’s seat and the steeringcolumn telescope feature will recall.Tilt/Telescope: The steering wheel tilt and steeringcolumn telescope features will recall.All (default): The driver’s seat and the steering wheeltilt and steering column telescope features will recall,if your vehicle has this option.No Change: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-77
