Black plate (51,1)Cadillac SRX Owner Manual - 2010Instruments and Controls 4-51“Learn” or “Smart” Buttons4. After Steps 1 through 3 havebeen completed, locate the“Learn” or “Smart” button insidethe garage on the garage dooropener receiver (motor-headunit). The name and colorof the button may vary bymanufacturer.5. Firmly press and release the“Learn” or “Smart” button. Afteryou press this button, you willhave 30 seconds to completeStep 6.6. Immediately return to thevehicle. Firmly press and holdfor two seconds the UniversalHome Remote button, selectedin Step 2 to control the garagedoor, and then release it. If thegarage door does not move orthe lamp on the garage dooropener receiver (motor-headunit) does not flash, press andhold the same button a secondtime for two seconds, and thenrelease it. Again, if the doordoes not move or the garagedoor lamp does not flash, pressand hold the same button a thirdtime for two seconds, and thenrelease.The Universal Home Remote shouldnow activate the garage door.To program the remaining twoUniversal Home Remote buttons,begin with Step 1 of “Programmingthe Universal Home RemoteSystem”.Gate Operator and CanadianProgrammingIf you have questions or needhelp programming the UniversalHome Remote System, call1‐800‐355‐3515 or go towww.homelink.com.Canadian radio-frequency lawsrequire transmitter signals to timeout or quit after several secondsof transmission. This may not belong enough for Universal HomeRemote to pick up the signal duringprogramming. Similarly, some U.S.gate operators are manufactured totime out in the same manner.
