Black plate (81,1)Cadillac SRX Owner Manual - 2010Vehicle Care 9-8115. If the flat tire was able to inflateto the recommended inflationpressure, remove themaximum speed label from thesealant canister (B) and placeit in a highly visible location.The label is a reminder not toexceed 55 mph (90 km/h) untilthe damaged tire is repaired orreplaced.16. Return the equipment to itsoriginal storage location in thevehicle.17. Immediately drive the vehicle5 miles (8 km) to distribute thesealant in the tire.18. Stop at a safe location andcheck the tire pressure. Referto Steps 1 through 11 under“Using the Tire Sealant andCompressor Kit without Sealantto Inflate a Tire (NotPunctured).”If the tire pressure has fallenmore than 10 psi (68 kPa)below the recommendedinflation pressure, stop drivingthe vehicle. The tire is tooseverely damaged and the tiresealant cannot seal the tire.See Roadside Service onpage 12‑6.If the tire pressure has notdropped more than 10 psi(68 kPa) from therecommended inflationpressure, inflate the tire to therecommended inflationpressure.19. Wipe off any sealant from thewheel, tire or vehicle.20. Dispose of the used sealantcanister (B) and sealant/airhose (G) assembly at a localdealer or in accordance withlocal state codes and practices.21. Replace it with a new canisteravailable from your dealer.22. After temporarily sealing a tireusing the tire sealant andcompressor kit, take thevehicle to an authorized dealerwithin a 100 miles (161 km) ofdriving to have the tire repairedor replaced.
