Black plate (15,1)Cadillac CTS Owner Manual (GMNA-Localizing-Europe-8087685) - 2015 -crc - 8/13/14In Brief 1-15Cruise ControlJ : Press to turn the system onand off. A white indicator appears inthe instrument cluster when cruiseis turned on.+RES: If there is a set speed inmemory, press the control up brieflyto resume to that speed or pressand hold to accelerate. If the cruisecontrol is already active, use toincrease vehicle speed. To increasespeed by 1 km/h (1 mph), press+RES up to the first detent. Toincrease speed to the next 5 km/h(5 mph) mark on the speedometer,press +RES up to the seconddetent.SET−: Press the control downbriefly to set the speed and activatecruise control. If cruise control isalready active, use to decreasevehicle speed. To decrease speedby 1 km/h (1 mph), press SET−down to the first detent. To decreasespeed to the next 5 km/h (5 mph)mark on the speedometer, pressSET− down to the second detent.* : Press to disengage cruisecontrol without erasing the setspeed from memory.See Cruise Control on page 9-31 orAdaptive Cruise Control onpage 9-33 (if equipped).Driver InformationCentre (DIC)The DIC display is in the instrumentcluster. It shows the status of manyvehicle systems.y or z : Press to move up ordown in a list.S or T : Press to move betweenthe interactive display zones in thecluster. Press S to go back to theprevious menu.SEL: Press to open a menu orselect a menu item. Press and holdto reset values on certain screens.See Driver Information Centre (DIC)on page 5-29.
