Black plate (20,1)Cadillac CTS Owner Manual (GMNA-Localizing-Europe-8087685) - 2015 -crc - 8/13/1410-20 Vehicle Care1. Before starting this check, besure there is enough roomaround the vehicle.2. Firmly apply both the parkingbrake and the regular brake. Donot use the accelerator pedal,and be ready to turn off theengine immediately if it starts.3. Try to start the engine in eachgear. The vehicle should startonly in P (Park) or N (Neutral).If the vehicle starts in any otherposition, contact your dealer forservice.Automatic TransmissionShift Lock ControlFunction Check{ WarningWhen you are doing thisinspection, the vehicle couldmove suddenly. If the vehiclemoves, you or others could beinjured.1. Before starting this check, besure there is enough roomaround the vehicle. It should beparked on a level surface.2. Firmly apply the parking brake.See Electric Parking Brake onpage 9-25.Be ready to apply the regularbrake immediately if the vehiclebegins to move.3. With the engine off, turn theignition on, but do not start theengine. Without applying theregular brake, try to move thegear lever out of P (Park) withnormal effort. If the shift levermoves out of P (Park), contactyour dealer for service.Park Brake and P (Park)Mechanism Check{ WarningWhen you are doing this check,the vehicle could begin to move.You or others could be injuredand property could be damaged.Make sure there is room in frontof the vehicle in case it begins toroll. Be ready to apply the regularbrake at once should the vehiclebegin to move.Park on a fairly steep hill, with thevehicle facing downhill. Keepingyour foot on the regular brake, applythe parking brake.. To check the parking brake'sholding ability: With the enginerunning and the transmission inN (Neutral), slowly remove footpressure from the regular brakepedal. Do this until the vehicle isheld by the parking brake only.
