Canon 2183B001 Instruction Manual

Also see for 2183B001: Specifications

Video3210x Optical ZoomPress the W side of the zoom lever tozoom out (wide angle). Press the Tside to zoom in (telephoto).You can also change the zoom speed( 42). You can select one of threefixed zoom speeds or a variable speedthat depends on how you operate thezoom lever: Press gently for a slowzoom; press harder for faster zooms.NOTES• Keep at least 1 m away from thesubject. At full wide angle, you canfocus on a subject as close as 1 cm.• You can also use the T and W buttonson the wireless controller or the LCDpanel. The zoom speed will be the sameas with the camcorder or fixed at[ SPEED 3] (when [ VARIABLE] isselected).• When set to [ VARIABLE], the zoomspeed will be faster in record pausemode.Quick Start FunctionWhen you press thecamcorder enters the standbymode. In standby mode the camcorderconsumes only about half the powerused when recording, saving energywhen you are using a battery pack.Additionally, when you pressagain the camcorder isready to start recording within approx.1 second, ensuring you do not missimportant shooting opportunities.1 Press firmly.The standby lamp flashes at firstwhile the camcorder is preparing andthen stays on when it enters thestandby mode.2 When you wish to resumerecording, pressagain.Within approx. 1 second, thecamcorder is ready in record pausemode.IMPORTANTDuring standby mode (while the standbylamp is on), do not disconnect the powersource.( 21)QUICK STARTQUICK STARTQUICK STARTQUICK START