Canon 2183B001 Instruction Manual

Also see for 2183B001: Specifications

93PrintingOthersList of Messagesappears in red. A memory card error occurred. Turn off the camcorder. Remove andreinsert the memory card and set the camcorder back tomode. If still appears in red, initialize the memory card.73Memory card is full. Erase still images to free some space or replace thememory card.66Problem SolutionThe printer is not operating eventhough the camcorder and printer arecorrectly connected.Disconnect the USB cable and turn off the camcorder and the printer. Aftera short while, turn them on again, set the camcorder to modeand restore the connection.–Problem SolutionA rattling can be heard from thecamcorder.The internal lens fixture can move when the camcorder is turned off. Thisis not a malfunction.–Message ExplanationCHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 18CANNOT ENTER THESTANDBY MODE NOWThe camcorder cannot enter the standby mode if the remaining battery chargeis too low.32TEMPERATURE TOO HIGHTURN OFF THE POWER AND WAITThe camcorder has exceeded its operational temperature. Disconnect thecompact power adapter and remove the battery pack. Let the camcorder cooldown before resuming use.–TEMPERATURE TOO LOWKEEP POWER ON AND WAITThe camcorder's temperature is too low. Keep the power on until theicon disappears.–TEMPERATURE TOO LOWUSE IN A WARM LOCATIONThe outside temperature is too low and the camcorder will not operate. Moveto a location between 0 °C and 40 °C.–TEMPERATURE TOO HIGHCANNOT RECORDThe camcorder has exceeded its operational temperature. Disconnect thecompact power adapter and remove the battery pack. Let the camcorder cooldown before resuming use.–• CANNOT RECORD• CANNOT PLAY BACKThere is a problem with the hard disk. –This message can also appear if condensation has formed. Wait until thecamcorder dries completely before resuming use.101REACHED THE MAXIMUMNUMBER OF SCENESThe maximum number of scenes has been reached. Delete some recordingsto free some space.38Problem Solution