Canon 2183B001 Instruction Manual

Also see for 2183B001: Specifications

62PhotosRefer to this chapter for details on shooting photos – from capturingand playing back images to printing them.Taking Photos1 Move the / switch to (Stillimages).2 Turn the switch to ON to setthe camcorder in CAMERA mode.The red CAMERA indicator will turnon.3 Press halfway.• Once the focus is automaticallyadjusted, will turn green andone or more AF frames will appear.• When you press on thewireless controller, the still image isrecorded immediately.4 Press fully.The CARD access indicator will flashas the still image is being recorded.IMPORTANTObserve the following precautions whilethe card access display ( ) appearson screen, and when the CARD accessindicator is on or flashing. Failing to do somay result in permanent data loss.- Do not subject the camcorder tovibrations or strong impacts.- Do not remove the memory card.- Do not disconnect the power source orturn off the camcorder.- Do not change the position of the /switch or the operating mode.NOTES• If the subject is not suitable forautofocus, turns yellow. Adjust thefocus manually ( 53).• When the subject is too bright,“OVEREXP.” starts flashing. In suchcase, use the optional FS-43U II NDfilter.RecordingBefore using a memory card for the firsttime, be sure to initialize it with thiscamcorder ( 73).( 21)PHOTOPHOTOPHOTO