Canon 2183B001 Instruction Manual

Also see for 2183B001: Specifications

75IMPORTANT• If continues to flash (for more than 1minute) or if does not appear, thecamcorder is not correctly connected tothe printer. In such case, disconnect theUSB cable and turn off the camcorderand the printer. After a short while, turnthem on again, set the camcorder tomode and restore theconnection.• During the following operations, even ifyou connect a printer to the camcorderit will not be recognized.- Erasing all still images- Erasing all transfer orders- Erasing all print ordersNOTES• will appear for images that cannot beprinted.• We recommend powering thecamcorder using the compact poweradapter.• Refer also to the printer’s instructionmanual.Printing with the (Print/Share)ButtonYou can print a still image withoutchanging the settings simply bypressing .1 Press or to select the stillimage you wish to print.2 Press .• Printing starts. The buttonflashes and stays on when theprinting is completed.• To continue printing, press orto select another still image.Selecting the Print SettingsYou can select the number of copiesand other settings for printing. Thesetting options vary depending on yourprinter model.Options[PAPER][ PAPER SIZE]Available paper sizes vary depending on theprinter model.[ PAPER TYPE]Select [PHOTO], [FAST PHOTO], [PLAIN] or[DEFAULT].[ PAGE LAYOUT]Select [DEFAULT] or one of the followingavailable page layouts.[BORDERED]: Prints the whole image area almostexactly as the recorded still image.[BORDERLESS]: Enlarges the center portion ofthe still image to fit the width/height ratio of theselected paper size. The top, bottom and sides ofthe still image may be slightly trimmed out.[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer tothe sidebar on page 76.