123Customizing Functions and Onscreen DisplaysCustomizing Functions and Onscreen DisplaysCustomize the camcorder to match your shooting style and needs. Use the [w Other Functions] >[Custom Function] setting to adjust how some of the camcorder’s controls and functions operate inmode. Similarly, use the [£ LCD/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customizethe onscreen displays that appear during recording. You can save these preferences along with other menusettings to an SD card and use them again later (A 124).Customizing FunctionsThe following table describes which functions can be customized using[Custom Function].1 Open the [Custom Function] submenu.[w Other Functions] > [Custom Function]2 Select the desired function.3 Change the setting option and then press SET.Customizable Functions with [Custom Function]Customizing Onscreen DisplaysFor details on which onscreen displays can be customized, refer toOnscreen Displays (A 55). For details on the setting options, refer to[Custom Display 1] and [Custom Display 2] (A 162).1 Open the [Custom Display 1] or [Custom Display 2] submenu.[£ LCD/VF Setup] > [Custom Display 1] or [Custom Display 2]2 Select the desired onscreen display.3 Change the setting option and then press SET.Operating modes:Menu item Description[Shockless WB] Creates a softer transition when the white balance is changed.# [AE Response] Controls the camcorder’s response ([Fast], [Normal] or [Slow]) when you change the automatic exposure setting.[Control Dial] Selects the function of the control dial on the camcorder.[Grip Ctrl Dial] Selects the function of the control dial on the grip unit.[Control Dial Dir.] Changes the direction of the adjustment when operating the control dial on the camcorder.[Grip Ctrl Dial Dir.] Changes the direction of the adjustment when operating the control dial on the grip unit.[SELECT Dial Dir.] Changes the direction of the adjustment when operating the SELECT dial.[F. Assist. B&W]Automatically switches the screen to B&W while the focus assist functions (peaking and magnification) are activated.You can have the screen switch to B&W when only the peaking is activated, when only the magnification is activated orwhen both are activated.[Scan Reverse Rec] Inverts the recorded image horizontally and/or vertically.[Character Rec] When this function is set to [On], all of the onscreen displays will be recorded to the clip exactly as they appear on the screen.[C START/STOP] Selects whether the START/STOP button will be active or locked too when the Q switch is set to C (key lock) (A 53).[w Other Functions][Custom Function][£ LCD/VF Setup][Custom Display 1][Custom Display 2]COPY
