Using Metadata96Using MetadataThe camcorder automatically adds metadata to clips while they are being recorded. You can use the suppliedCanon XF Utility software to check and search for specific metadata. You can also create and transfer a usermemo remotely using the Wi-Fi Remote application (A 49).Metadata Components1 User memo files need to be created using the software and saved on the SD card in advance.2 Only when an optional GP-E1 GPS Receiver is attached to the camcorder. While recording, GPS information is recordedautomatically by the camcorder (A 103).3 GPS information can only be added to clips already recorded.4 Recording data is logged automatically by the camcorder.Setting a User Memo Created with Canon XF UtilityBefore you can add a user memo, you must first install the supplied Canon XF Utility software (A 143). Next,create the user memo and then save it to an SD card. Once you insert the SD card in the camcorder and selectthe user memo, it will be added to clips you record.For details on using the supplied software, refer to the instruction manual that is installed with the Canon XFUtility software (A 149).1 Use Canon XF Utility to save a user memo to an SD card.• For details, refer toManaging User Memo Profiles in the Canon XF Utility Instruction Manual.2 Insert the SD card into the SD card slot of the camcorder.3 Open the metadata [Setting] submenu.[w Other Functions] > [Set Metadata] > [Setting]4 Select [SD Card] and then press SET.5 Open the [User Memo] submenu.[w Other Functions] > [Set Metadata] > [User Memo]6 Select the file name of the desired user memo and then press SET.• The Q icon appears on the right of the screen.• Select [Off] to record clips without a user memo.NOTES• After you set a user memo, do not remove the SD card while you arerecording. If the SD card is removed, the user memo will not be addedto the clip.• You must set the user memo before you start recording for it to be added tothe clip. You cannot change the user memo already added to a clip usingthe camcorder but you can do so with the Canon XF Utility software.Metadata Entering content Checking contentCamcorder Canon XF Utility Wi-Fi Remote Canon XF UtilityUser Memo: clip title, creator, location and description. – Ü1 Ü ÜGPS information: altitude, latitude and longitude. Ü2 Ü3 Ü ÜRecording data: Shutter speed, ISO speed/gain value, etc. – 4 – – ÜUnique Material Identifiers (UMID): country, organizationand user codes based on the SMPTE standard.Ü(A 167) – – –Operating modes:[w Other Functions][Set Metadata][ Setting][SD Card][w Other Functions][Set Metadata][User Memo]COPY
