99Video ScopesVideo ScopesThe camcorder can display a simplified waveform monitor or vectorscope. It can also display an edge monitor*to help you focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder or onan external monitor. In order to use the video scopes, the monitor unit must be attached to the camcorder.* The edge monitor looks at the focus of the entire picture and displays the results as a waveform. The edge monitor is availableonly in mode.Displaying a Video ScopePress the WFM button (waveform monitor or vectorscope) or EDGEMON. button (edge monitor, only in mode).• The waveform monitor will appear in a window on the lower right of thescreen.• You can repeatedly press the WFM button to activate the video scopesin the following sequence.Waveform monitor Vectorscope Off• Alternatively, you can display the video scopes using [w OtherFunctions] > [WFM (LCD)] > [Setting]. Select [WFM] for the waveformmonitor, [VS] for the vectorscope or [Edge Mon.] for the edge monitor.Configuring the Waveform MonitorThe camcorder’s waveform monitor function offers 5 modes. You can alsochange the gain.1 Open the [Waveform Monitor] submenu.[w Other Functions] > [WFM (LCD)] > [Waveform Monitor]2 Select the desired option and then press SET.• If you do not need to change the gain, you do not need to perform steps 3 and 4.3 Open the waveform monitor [Gain] submenu.[w Other Functions] > [WFM (LCD)] > [Gain] (under [Waveform Monitor])4 Select [1x] or [2x] and then press SET.OptionsOperating modes:[Line]: Sets the waveform monitor to line display mode.[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode waveform.[Field]: Sets the waveform monitor to field display mode.[RGB]: Functions like an RGB parade scope.[YPbPr]: Functions like a YPbPr parade scope.[w Other Functions][WFM (LCD)][Waveform Monitor][Line]COPY
