Recording Video58Canon Log Gamma and CINEMA PresetYou can easily set the camcorder to use a number of preset picture-related settings especially designed with professional cinematographyand motion picture production in mind. With the CINEMA preset settings,the gamma and color matrix (A 117) will be set to the advanced CanonLog setting, which makes full use of the newly developed image sensor tooffer spectacular dynamic range. On the other hand, other custom picturesettings will not be available.Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, youcan apply a LUT (look-up table) to clips recorded using Canon Log gamma to view the clips with more naturalcolors. For details about available LUTs, visit your local Canon Web site.1 Open the [/ CINEMA Locked] submenu.[~ Camera Setup] > [/ CINEMA Locked]2 Select [On] and then press SET.• All picture-related settings will be set according to the CINEMA preset values.• [/ LOCKED] appears on the left of the screen.Checking Clips Recorded with Canon Log Gamma (View Assistance)When Canon Log gamma is used, the image displayed on the screen will appear darker than usual. You can usethe view assistance function to display an image that approximates the one that would be obtained using normalgamma settings. View assistance is only applied on the camcorder screen; it will not affect your recordings or thevideo signal output from the various terminals.1 Open the [View Assist.] submenu.[£ LCD/VF Setup] > [View Assist.]2 Select [On] and then press SET.• will appear on the lower left of the screen.[~ Camera Setup][/ CINEMA Locked][Off][£ LCD/VF Setup][ View Assist.][Off]COPY
