83Onscreen Markers and Zebra PatternsNOTES• You can turn off all other onscreen displays, leaving only the onscreen markers (A 55).• If you set an assignable button to [Markers] (A 111), you can press the button to turn the onscreen markerson and off.Displaying Zebra PatternsThe camcorder has a zebra pattern feature that shows black and whitediagonal stripes over areas that are overexposed. This is displayed onlyon the screen and will not affect your recordings. There are two types ofzebra patterns and you can display both simultaneously. Zebra 1 lets youidentify areas within a certain range (±5% of a specified level) while zebra2 lets you identify areas that are over a specified level. When you displayboth simultaneously and they overlap, only zebra 1 will be displayed inthose areas.1 Open the zebra pattern [Select] submenu.[£ LCD/VF Setup] > [Select] (under [Zebra])2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press SET.3 Open the zebra level submenu.[£ LCD/VF Setup] > [Zebra 1 Level] or [Zebra 2 Level]4 Select a zebra level and then press SET.5 Press the ZEBRA button to activate the selected zebra pattern.• Alternatively, before closing the menu, you can also select [Zebra],select [On] and then press SET.NOTES• You can use the [£ LCD/VF Setup] > [Zebra HD Output] setting to display the zebra pattern on an externalmonitor connected to the HD/SD SDI terminal (HD output only), SYNC OUT terminal (HD-Y signal output only)or HDMI OUT terminal (HD output only).Center markerGrid[£ LCD/VF Setup][Select](under [Zebra])[Zebra 1]COPY
