117Using Anamorphic LensesUsing Anamorphic LensesYou can attach an anamorphic lens to the camera and set the anamorphic desqueeze ratio used to display theimage from the camera on monitoring devices while shooting or during playback.1 To apply the anamorphic desqueeze to individual video outputs, select > [¢ MonitoringSetup] > [Anamorphic: VIDEO Term.] (LCD screen), [Anamorphic: EVF-V50] (optional viewfinder) or[Anamorphic: MON./HDMI] (external monitors) > [On].2 Select > [¢ Monitoring Setup] > [Anamorphic Desqueeze] > [Lens Squeeze Factor], [x2.0]or [x1.3].• You can select a fixed desqueeze factor of x2.0 or x1.3. If you selected [Lens Squeeze Factor], theanamorphic correction will be applied according to the factor specified with the > [Æ Recording/Media Setup] > [Metadata] > [Lens Squeeze] setting.3 If necessary, select > [¢ Monitoring Setup] > [Desqueeze for S&F] > [Reduced Display] or[Off].• When slow & fast motion recording is activated, the desqueezed image can only be displayed windowboxed([Reduced Display]). You can select [Off] to display the image without correction.NOTESNOTES• You can record the lens’s squeeze factor in the clip’s metadata with the > [Æ Recording/MediaSetup] > [Metadata] > [Lens Squeeze] setting.• In CAMERA mode during normal recording mode, if [Anamorphic: MON./HDMI] is set to [On] when the HDMIOUT terminal’s resolution is set to [4096x2160 / 3840x2160] and the frame rate is set to 59.94P or 50.00P, thevideo output from the HDMI OUT terminal will be a 1920x1080 image.• The image displayed during photo playback and the camera’s live view image in the Browser Remoteapplication will not be desqueezed.
