85FocusAF LockWhile using continuous AF or AF-Boosted MF, you can lock the focus on a certain subject and then move thecamera to change the composition. To use AF lock, you must set an assignable button to [AF Lock] in advance.1 Set an assignable button to [AF Lock] (A 119).2 While the autofocus is active, press the assignable button.• The focus will be locked and @ and the AF frame will turn gray. When you are using Face AF, the facedetection frame around the main subject will turn gray.• Press the assignable button again to cancel the AF lock.NOTESNOTES• AF lock will be canceled automatically in the following cases:- If the camera is turned off or the camera’s system frequency is changed.- If the lens is removed or replaced.- If > [v Camera Setup] > [AF Mode] is changed to [One Shot].- When slow & fast motion recording is activated.Changing the AF Frame Size and PositionYou can change the size and position of the AF frame that appears on the screen while using one of theautofocus functions.1 Select > [v Camera Setup] > [AF Frame Position] > [Selectable] or [Center Frame].2 Select > [v Camera Setup] > [AF Frame Size] > [Large] or [Small].Options for [AF Frame Position][Selectable]: You can move the AF frame by touching the desired point on the LCD screen. You can also usethe joystick or SELECT dial. Press the CANCEL button to return the AF frame to the center ofthe screen.[Center Frame]: A fixed AF frame appears at the center of the screen.Options for [AF Frame Size][Large]: Standard AF frame size.[Small]: Smaller AF frame size (about 1/3 the standard size).
