White Balance76White BalanceIn CAMERA mode, the camera uses an electronic white balance process to calibrate the picture and produceaccurate colors under different lighting conditions. The camera offers the following ways to set the whitebalance.You can also perform this function remotely using Browser Remote on a connected network device (A 172,175).Custom white balance: You can use a gray card or white object with no pattern to establish the white balanceand set it to one of two custom white balance positions, ÅA or ÅB. When recording under fluorescent lights,we recommend setting the custom white balance.Preset white balance: Set the white balance to ¼ (daylight) or É (tungsten lamp). You can further adjust thecolor temperature (K) value and the color compensation (CC) value, which adjusts the color along the green/magenta gradation.Color temperature: Allows you to set the color temperature between 2,000 K and 15,000 K, and further adjustthe color compensation (CC) value.Auto white balance (AWB): The camera automatically adjusts the white balance to the optimal level.NOTESNOTES• The [White Balance] and [Color Matrix Tuning] settings in the custom picture file (A 128) take precedenceover the white balance set with these procedures.• You can use the > [v Camera Setup] > [Shockless WB] setting to make the transition look smootherwhen you change the white balance settings.• You can use the > [v Camera Setup] > [C. Temp. Increment] setting to change the units for the colortemperature increment to [Mired] (5-mired increments) or [Kelvin] (100-kelvin increments). Even when [Mired] isselected, the color temperature is converted to and displayed in kelvins. Changing this setting may change thewhite balance setting.• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the white balancewith the remote controller’s AWB button, A button, B button, PRESET button and Å button.• The color temperatures displayed on the screen are approximate. Use them only as a reference.Custom White Balance1 Press the WB button.• The camera will enter the direct setting mode (A 66) with thewhite balance mode icon highlighted.2 Select the ÅA or ÅB icon.• Press SET to apply the stored custom white balance setting asis. The rest of the procedure is not necessary. To set a newcustom white balance, continue the procedure.3 Point the camera at a gray card or white object so that it fillsthe whole screen.• Use the same lighting conditions you plan to use whenrecording.
