Chapter 7 Receiving Fax Documents 7-1Receiving FaxDocumentsChapter 7Receiving Fax DocumentsThis chapter explains how to receive fax documents with yourMultiPASS 1000. It includes:o Receiving documents over a dedicated fax lineo Receiving both documents and telephone calls over a sharedfax/telephone line (FAX/TEL SWITCH)o Receiving documents in memoryo Receiving documents manuallyo Receiving documents using an extension telephoneo Customizing the receiving operations• Receiving oversized documents• Setting up special receiving features• Customizing the FAX/TEL SWITCH feature• Restricted receiving• Customizing the receiving speedThe procedures for receiving depend on whether you use theMultiPASS 1000 for both fax and telephone communication or justfor fax communication.o If you have one phone line in your office, you probably intendto use the MultiPASS 1000 for both fax and telephonecommunication.o If you have two phone lines in your office, you probably planto use one line for the MultiPASS 1000 and the other line foryour telephone.C Do not pull received documents or printouts from your MultiPASS1000. Always wait until the unit ejects a page completely and beepsbefore you remove a page. If you pull a document out before it isejected, the message DARK PAPER USED may appear in the LCDdisplay. If you see this message, refer to Chapter 14, Troubleshooting.
