Chapter 10 Special Sending Procedures 10-77. Use the numeric keypad to enter the group number.o If the group number is a single digit, precede it with 0.o If you make an error entering the group number, pressCLEAR and then enter the number correctly.8. Press START/COPY.9. To use memory sending or to send to more than one relay fax,press FUNCTION. Otherwise, go to step 11.N If you are sending to more than one relay fax, you must usememory sending.10. Press MEMORY TRANSMISSION.11. Enter the fax number(s).o If you are using direct sending, you can send to one relayfax only.o If you are using memory sending, you can send to up to 97relay fax machines. See Sending to More Than One Locationon page 10-1 for details.12. Press START/COPY.o If you are using memory sending, the MultiPASS 1000scans up to 50 letter-size pages (based on CCITT #1 Chart)into memory. See Sending Large Documents on page 5-10 fordetails.The MultiPASS 1000 sends the document to the relay fax(es). SeeTransmitting the Document on page 5-11 for details.DOCUMENT READYRELAY 08 MEMORYSELECT MENUDOCUMENT READYRELAY 08Special SendingProcedures
