8-8 Using the Telephone, an Answering Machine, and a Modem Chapter 87. Press START/COPY.8. Press the numeric buttons to enter the number of seconds youwant the MultiPASS 1000 to wait before switching to automaticreceiving.o You can choose from 1 to 99 seconds. The number ofseconds you choose must be less than the time it takes theanswering machine to hang up the phone after the callerfinishes leaving a message. (This will depend on the modelof the answering machine.)o In this example, the MultiPASS 1000 will switch to faxmode after four seconds of silence.9. Press START/COPY.10. Press STOP.N If your answering machine does not record at all or does not finishrecording the voice message, change the ANS/FAX SWITCH to OFF.When the ANS/FAX SWITCH is set to OFF, the MultiPASS 1000switches to automatic receiving only for fax machines that useCNG (calling tone). Some fax machines (especially older models)do not send a CNG tone. In this case, you need to set the ANS/FAXSWITCH to ON.ANS/FAX SWITCH TIMEDATA ENTRY OKANS/FAX SWITCH TIME4
