Chapter 12 Miscellaneous Printer Operations 12-1Chapter 12Miscellaneous Printer OperationsThis chapter describes miscellaneous printer operations you canperform with your MultiPASS 1000. It includes:o Changing printer settingsChanging Printer SettingsYou can customize the built-in bubble jet printer settings bychanging the following selections in the PRINTER SETTINGS menu:o SELECT PAPER SIZEChanges the paper size that the MultiPASS 1000 uses: letter,(8.5 x 11”) legal (8.5 x 14”) or A4 (8.25 x 11.7”).LTRA4LEGALo RX REDUCTIONSelects a reduction mode for incoming documents. Whenreduction mode is turned on, you can select a reduction size of75%, 85%, 90%, or 95%. Also, you can specify whether thereduction is to be vertical only or both vertical and horizontal.When set to ON, all documents are reduced.ONOFFo INK DETECTORTurns the ink detector on or off; the ink detector prints a smallsquare box on the bottom right of incoming documents to helpyou estimate the amount of ink remaining. Turning this featureon allows the MultiPASS 1000 to check automatically if there isenough ink in the cartridge.ONOFFN When set to OFF, the MultiPASS 1000 cannot detect when an inkcartridge runs out of ink. Instead of displaying the CHANGECARTRIDGE message and storing the document in memory, theMultiPASS 1000 continues to print (even blank pages).MiscellaneousPrinter Operations
