copying.The machine starts copying.Remove the original on the Platen Glass after copying is completed.ImportantDo not stare at the light directly for an extended period of time when scanning photos.Do not open the Document Cover or move the loaded original until copying is completed.NotePress the Stop button to cancel copying.Repeat the procedures from (5) in step 1 to copy another original.You can exit the Copy menu and select another menu if you press the HOME button.Setting Items(1) MagnificationSpecify the enlargement/reduction manner. You can specify the copy scale by selecting the optionalnumber or the page size: A4 to 8.5"x11", A4 to B5, etc. If you do not want to enlarge/reduce the page size,select 100%. For details, refer to the on-screen manual: Advanced Guide.(2) IntensitySpecify the intensity when you want to make the darkened/lightened copy. You can also set the intensity toautomatically adjust according to the original. For details, refer to the on-screen manual: Advanced Guide.(3) Page sizeSelect the page size of the paper to print: A4, 8.5"x11"(LTR), etc.(4) Media typeSelect the media type of the paper to print: Plain paper, Plus Glossy II, etc.NoteIf you do not select the page size and media type correctly, the machine may feed paperfrom the wrong paper source or may not print with the proper print quality.See Paper Source to Load Paper .(5) Print qualityAdjust the print quality according to the original to copy: High(quality-priority), Standard, etc. The availableprint quality settings depend on the paper selected in Media type.(6) Paper sourceThe paper source for the selected page size and media type appears on the screen.When A4, B5, A5, or Letter-sized plain paper is selected, Cassette appears.When other sizes or types of paper are selected, Rear tray appears.Confirm that the selected paper is loaded in the paper source displayed on the screen.For details on the paper source setting, refer to the on-screen manual: Advanced Guide.NoteThe settings of the page size, media type, print quality, automatic intensity, etc. are retained,and these settings will appear next time when the Copy menu is selected even if the power isturned off and on.Combination of some items cannot be specified depending on the function.If you select Fast (speed-priority) with the media type set to Plain paper and the quality is notas good as expected, select Standard or High(quality-priority) and then try copying again.When you make black & white copies by pressing the Black button, select High(quality-priority) for the print quality to copy in grayscale. Grayscale renders tones in a range of graysinstead of black or white.Page 28 of 947 pagesMaking Copies
