Select when you perform settings for wireless LAN using Windows Connect Now(WCN) feature. You need a USB flash drive on which settings for wireless LAN aresaved.Wireless LAN setting listThe list of wireless LAN settings of this machine is displayed on the LCD.The following setting items are displayed.Items Setting (IPv4) Setting (IPv6)Connection Active/Inactive Active/InactiveSSID XXXXXXXXXXX XXXXXXXXXXXBSSID XX:XX:XX:XX XX:XX:XX:XX:XX:XXCommunicationmodeInfrastructure InfrastructureChannel XX XXData encryption Disable/WEP/TKIP/AES Disable/WEP/TKIP/AESNetworkauthenticationAuto/Open system/Shared key/WPA-PSK/WPA2-PSKAuto/Open system/Shared key/WPA-PSK/WPA2-PSKIP address XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX.XXX. XXX. XXX. XXXSubnet mask XXX. XXX. XXX. XXX -Subnet prefixlength- XXXDefault gateway XXX. XXX. XXX. XXX XXX. XXX. XXX. XXXMAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XXWEP bit 128, 64 128, 64Destination XX XXIPsec Settings - Active/InactiveSecurity protocol - ESP/ESP & AH/AHPre-shared key - XXXXXXXXXXX("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)Wired LAN setting listThe list of wired LAN settings of this machine is displayed on the LCD.The following setting items are displayed.Items Setting (IPv4) Setting (IPv6)Connection Active/Inactive Active/InactiveIP address XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX.XXX. XXX. XXX. XXXSubnet mask XXX. XXX. XXX. XXX -Subnet prefix length - XXXDefault gateway XXX. XXX. XXX. XXX XXX. XXX. XXX. XXXMAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XXIPsec Settings - Active/InactiveSecurity protocol - ESP/ESP & AH/AHPre-shared key - XXXXXXXXXXX("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)IPv4/IPv6 settingSelects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.WSD settingActivates/inactivates the WSD (one of the network protocols supported in Windows Vista)setting.Page 762 of 947 pagesChanging the Machine Settings on the LCD
