More data is distributed to thehighlight side.More data is distributed to theshadow side.Data is widely distributed between thehighlight and shadow.Adjusting Histograms (Using the Slider)Select a Channel, then move (Black-point Slider) or (White-point Slider) to specify the level to beset as the shadow or highlight.- All parts to the left of (Black-point Slider) will be black (level 0).- The parts at (Mid-point Slider) will turn to the color exactly between the black-point and white-point.- All parts to the right of (White-point Slider) will turn white (level 255).Auto Tone is set to ON by default. Adjustments shown below are automatically performed.Moving the Black-point and White-point SlidersMove the Black-point Slider or White-point Slider to adjust brightness.Images with more data distributed to the highlight sideMove the Black-point Slider toward the highlight side.Images with more data distributed to the shadow sideMove the White-point Slider toward the shadow side.Images with widely distributed dataMove the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side.Moving the Mid-point SliderMove the Mid-point Slider to specify the level to be set as the middle of the tonal range.Images with more data distributed to the highlight sidePage 606 of 947 pagesAdjusting Histogram
