Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from Film (MP980 series)Printing from Film (MP980 series)Print an image on a film (35 mm negative/positive (strip/slide)) onto a printable DVD/CD.ImportantYou cannot print on 8 cm DVD/CDs.NoteIf printing is misaligned, adjust the printing position. For information on how to adjust it, seeAdjusting the Print Area .1. Make sure that the machine is turned on.2. Select DVD/CD label print on the HOME screen, then press the OK button.3. Select From film, then press the OK button.The print area setting screen is displayed.4. Use the or button to select Outer circle or Inner circle and use the orbutton to change the print area.5. Press the OK button.NoteMeasure the outer and inner diameters of the printing surface of the printable DVD/CD andmake sure you set a value smaller than the measured value for the outer diameter, and a valuelarger than the measured value for the inner diameter.For information on printable discs, contact their manufacturers.6. Use the or button to select Recommended DVD/CD or Other DVD/CD, thenpress the OK button.NoteIf your medium is the recommended DVD or CD, specify Recommended DVD/CD for thesuitable density printing. If not, specify Other DVD/CD.7. Select the type of film.NoteYou can select Color negative film, B&W negative film, Color positive film, or Mount (for slides).8. Load the film on the Platen Glass.Press the Color button to scan the film.ImportantDo not see the light source directly while scanning is in progress.9. Use the or button to select the photo to print, then press the OK button.NoteIf appears on the preview screen, the photos may be not scanned properly. Press thePage 679 of 947 pagesPrinting from Film (MP980 series)
