2. Load the film on the Platen Glass.See Loading the Film .3. Close the Document Cover gently, and press the Color button.The machine starts scanning the film.ImportantDo not stare at the light directly for an extended period of time when scanning the film.Do not open the Document Cover or move the loaded film until scanning is completed.NoteThe film is rescanned before printing starts. Do not move the loaded film on the Platen Glassuntil the printing is completed.If the film is not scanned properly, refer to " Troubleshooting " in the on-screen manual:Advanced Guide.4. Specify the number of copies.See Specify the number of copies. in "Reprinting Printed Photos".5. Start printing.See Start printing. in "Reprinting Printed Photos".6. Reattach the Film Guide to the machine.See Removing the Film .NoteYou can exit the Film print menu and select another menu, if you press the HOME button after theprinting is completed. Confirm the message, and select Yes to delete the scanned image data.Loading the FilmMount the film in the Film Guide, and load it on the Platen Glass. The Film Guide is stored behind theFAU (Film Adapter Unit) Protective Sheet. To scan the film using a computer, follow the same procedurebelow.1. Remove the Film Guide from the FAU Protective Sheet.(1) Lift the Document Cover and remove the FAU Protective Sheet from theDocument Cover.Page 36 of 947 pagesPrinting Photos from a Film
