Print settingsLAN settingsAdvanced settingsMobile phone print settingBluetooth settingsPictBridge print settingsLanguage selectionReset settingPlain paper feed settingsSpecifies the paper source for A4, Letter, A5, and B5 plain paper.NoteA4, Letter, A5, and B5 paper can be loaded in the Cassette. Load on the Rear Tray for theother sizes of paper.Print settingsPrevent paper abrasionUse this setting only if the print surface becomes smudged.ImportantBe sure to set this back to OFF after printing since it may result in lower printing speed orlower print quality.Extended copy amountSelects the amount of image that extends off the paper when printing in Borderless (full).ImportantThis setting can be applied only when copy or easy photo reprint mode is selected.NoteIf printouts contain margins even though you are printing in Borderless, specifying Largefor this setting may help solve the problem.Film print cutting rangeUse this setting to specify the cutting range of the 35 mm film.ImportantSelect Undersize cut when the frame of film is scanned on the edge of the image.Select Oversize cut when the edge of image is not scanned.LAN settingsChange wireless/wiredActivates wired or wireless LAN.NoteWhen you change the connection method (wired or wireless), set up the machineaccording to the method you will use. For details, refer to your setup manual.Wireless LAN settingsSelects the setting method for wireless LAN connection.WPS settingSelect when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS).Select Push button method or PIN method according to the method your access pointsupports, then follow the on-screen instructions.WCN settingPage 761 of 947 pagesChanging the Machine Settings on the LCD
