Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from Photo DataPrinting from Photo DataPrint an image on a memory card onto a printable DVD/CD.ImportantYou cannot print on 8 cm DVD/CDs.NoteIf printing is misaligned, adjust the printing position. For information on how to adjust it, seeAdjusting the Print Area .1. Make sure that the machine is turned on.2. Select DVD/CD label print on the HOME screen, then press the OK button.3. Select From photo data, then press the OK button.4. Confirm the message, then insert the memory card into the Card Slot.The print area setting screen is displayed.5. Use the or button to select Outer circle or Inner circle and use the orbutton to change the print area.6. Press the OK button.NoteMeasure the outer and inner diameters of the printing surface of the printable DVD/CD andmake sure you set a value smaller than the measured value for the outer diameter, and a valuelarger than the measured value for the inner diameter.For information on printable discs, contact their manufacturers.7. Use the or button to select Recommended DVD/CD or Other DVD/CD, thenpress the OK button.NoteIf your medium is the recommended DVD or CD, specify Recommended DVD/CD for thesuitable density printing. If not, specify Other DVD/CD.8. Use the or button to select the photo to print, then press the OK button.9. Confirm the print image on the DVD/CD, then press the OK button.NoteOther optionsPrinting a Specified Area (Trimming)Searching for Photos with the Shooting Date (Search)10. Check the print settings, then press the OK button.The message for preparation is displayed.NoteTo change print settings, press the Back button repeatedly until the screen for the setting itemPage 675 of 947 pagesPrinting from Photo Data
