Aligning the Print Head ManuallyIf printed ruled lines are misaligned or print results are still not satisfactory after adjusting the print headposition automatically, adjust the print head position manually.NoteFor details on adjusting the print head position automatically, see Aligning the Print Head.The print head alignment pattern is printed in black and blue.You need to prepare: three sheets of A4 or Letter-sized plain paper1. Make sure that the power is turned on.2. Make sure that three or more sheets of A4 or Letter-sized plain paper are loaded inthe cassette (lower).3. Open the paper output tray.(1) Holding both sides of the paper output tray, gently open it.The output tray extension will open automatically when the paper output tray is opened.(2) Extend the paper output support.ImportantIf the inner cover is open, close it.4. Print the print head alignment pattern.(1) Press the MENU button.(2) Select Setup, then press the OK button.LCD and Operation PanelThe setup menu screen will appear.(3) Select Maintenance, then press the OK button.The Maintenance screen will appear.(4) Select Manual head alignment, then press the OK button.The confirmation screen will appear.Note
