Printing Out Network Setting InformationYou can print out the network settings of the machine such as its IP address and SSID.ImportantThis print out contains valuable information about your computer. Handle it with care.1. Make sure that the machine is turned on.Confirming that the Power Is On2. Load a sheet of A4 or Letter-sized plain paper.Loading Paper3. Press the MENU button.The menu screen is displayed.4. Select Setup, then use the OK button to confirm the selection.5. Select Device settings, then use the OK button to confirm theselection.6. Use the button to select LAN settings, then use the OK button to confirmthe selection.7. Use the button to select Confirm LAN settings, then use the OK button toconfirm the selection.8. Use the button to select Print LAN details, then use the OK button toconfirm the selection.9. Use the button to select Yes, then use the OK button to start printing.The machine starts printing the network setting information.The following information on the machine's network setting is printed out.Item Explanations of the item SettingWireless LAN Wireless LAN Enable/DisableConnection Status of the Wireless LAN Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXSSID SSID SSID of the wireless LANCommunication Mode Communication Mode InfrastructureChannel Channel XX (1 to 13)Encryption Method of the Encryption none/WEP/TKIP/AESWEP Key Length WEP Key Length Inactive/128/64Authentication Method of theAuthenticationnone/auto/open/shared/WPA-PSK/WPA2-PSKSignal Strength Signal Strength 0 to 100 [%]TCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4
