Search ScreenNoteThis screen is not available depending on the printer you are using.The access points detected are listed.1. Detected Access Points:The signal strength from the access point, encryption type, name of access point, and the radiochannel can be confirmed.ImportantIf you connect to a network that is not protected with security measures, there is a risk ofdisclosing data such as your personal information to a third party.NoteSignal strength is displayed as follows.: Good: Fair: PoorType of encryption is displayed as follows.Blank: No encryptionWEP: WEP is setWPA: WPA is setWPA2: WPA2 is set2. UpdateClick to update the list of access points when your target access point is not detected.If the target access point is set to the stealth mode, click Cancel to return to the previous screenand enter the access point's Service Set Identifier in SSID: on the Wireless LAN sheet.Wireless LAN SheetNoteWhen detecting your target access point, make sure that the access point is turned on.3. SetClick to set the access point's SSID in SSID: on the Wireless LAN sheet.NoteThe WEP Details screen, the WPA Details screen, or the WPA2 Details screen appears ifthe selected access point is encrypted. In this case, configure the details to use the sameencryption settings set to the access point.
