Precautions for Safe Transport of the MachineWhen relocating the machine, make sure of the following.ImportantWhen sending the machine for repairPack the machine in a sturdy box so that it is placed with its bottom facing down, usingsufficient protective material to ensure safe transport.With the print head and ink tank left installed in the machine, press the ON button to turn off thepower. This allows the machine to automatically cap the print head, thus preventing it fromdrying.After packing, do not tilt the box containing the machine or turn it on its side or upside down.Doing so may cause the ink to leak during transport and cause damage to the machine.When a shipping agent is handling transport of the machine, have its box marked "THIS SIDEUP" to keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLEWITH CARE".1. Turn the machine off.2. Confirm that all the lamps on the operation panel are off and unplug themachine.Notice for Unplugging the Power CordImportantDo not unplug the machine while any lamp on the operation panel is lit or flashing, as itmay cause malfunction or damage to the machine, making the machine unable to print.3. Retract the paper output support, then close the paper output tray gently.The output tray extension is retracted automatically when the paper output tray is closed.4. Disconnect the printer cable from the computer and from the machine, thendisconnect the power plug from the machine.5. Use adhesive tape to secure all the covers on the machine to keep them fromopening during transportation. Then pack the machine in the plastic bag.6. Attach the protective material to the machine when packing the machine in thebox.
