IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXXIPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXXSubnet Mask Subnet Mask XXX.XXX.XXX.XXXIPv6 IP Address *1 Selected IP Address (IPv6) XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *1 Default Gateway (IPv6) XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXXSubnet Prefix Length*1 Subnet Prefix Length XXXIPsec*2 IPsec setting ActiveSecurity Protocol*2 Method of the SecurityProtocol ESP/ESP & AH/AHWireless LAN DRX Discontinuous reception(wireless LAN) Enable/DisableWired LAN Wired LAN Enable/DisableConnection Status of the Wired LAN Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXTCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXXIPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXXSubnet Mask Subnet Mask XXX.XXX.XXX.XXXIPv6 IP Address *1 Selected IP Address (IPv6) XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXXIPv6 Default Gateway *1 Default Gateway (IPv6) XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXXSubnet Prefix Length*1 Subnet Prefix Length XXXIPsec*2 IPsec setting ActiveSecurity Protocol*2 Method of the SecurityProtocol ESP/ESP & AH/AHWired LAN DRX Discontinuous reception(wired LAN) Enable/DisableOther Settings Other settings -Printer Name Printer name Printer name (Up to 15 characters)WSD WSD setting Enable/DisableWSD Timeout Timeout 1/5/10/15/20 [min]LPR Protocol LPR protocol setting Enable/DisableBonjour Bonjour setting Enable/DisableBonjour Service Name Bonjour service name Bonjour service name (Up to 52characters)PictBridge Commun. PictBridge Communication Enable/DisableDNS Server Getting DNS Serverautomatically Auto/ManualPrimary Server Primary server address XXX.XXX.XXX.XXXSecondary Server Secondary server address XXX.XXX.XXX.XXXProxy Server Proxy Server setting Enable/DisableProxy Port Specifying Proxy Port 1 to 65535Proxy Address Proxy Address XXXXXXXXXXXXXXXXXXXXIP Address Filtering IP Address Filtering Enable/Disable("XX" represents alphanumeric characters.)*1 Only when IPv6 is activated, the status of the network is printed.*2 Only IPv6 and the IPsec setting are activated, the status of the network is printed.
