1. Enable printer access control(MAC address)Select to enable access control to the printer by MAC address.NoteThe two types of access control (i.e., by MAC address and by IP address) can be enabledat the same time.An access control type is enabled as long as the Enable printer access control check boxis selected, regardless of the type currently displayed by selecting in Printer AccessControl Type:.When both access control types are enabled at the same time, a computer or a networkdevice whose address is registered to either list will be allowed access to the printer.2. Accessible MAC Addresses:Shows the registered MAC addresses and any comments.3. Edit...The Edit Accessible MAC Address screen is displayed to edit the settings selected inAccessible MAC Addresses:.Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen4. Add...The Add Accessible MAC Address screen is displayed to register the MAC address of acomputer or a network device from which to access the printer over the network.ImportantAdd the MAC address of all computers or network devices within the network from which toaccess the printer. The printer cannot be accessed from a computer or a network device thatis not on the list.5. DeleteDeletes the selected MAC address from the list.When Selecting IP addressThe accessible computers or network devices are specified by their IP addresses. Computers ornetwork devices whose IP addresses appear on the list are allowed access.1. Enable printer access control(IP address)Select to enable access control to the printer by IP address.
