Advanced Guide TroubleshootingContents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Entering the Date and TimeEntering the Date and TimeNoteThree date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.For details, refer to the on-screen manual: Advanced Guide.When the machine is connected to a computer with the MP Drivers installed, the date and timesetting will be copied from the computer to the machine. As long as the date and time is setaccurately on your computer, you do not need to set it on the machine.If you disconnect the power plug or when there is a power failure, the date and time setting on themachine will be reset. When you connect the machine to a computer with the MP Drivers installed,the setting will be copied to the machine once again.1. Display the Date/time setting screen.(1) Press the FAX button, and press the Menu button.The Fax settings menu will appear.(2) Use the (-) or (+) button to select User settings, and press the OK button.The User settings menu will appear.(3) Use the (-) or (+) button to select Date/time setting, and press the OKbutton.2. Enter the date and time.(1) Use the Numeric buttons to enter the date and time (in 24-hour format).Enter only the last two digits of the year.NoteIf you misentered the date and time, press the (-) or (+) button to move the cursorunder the number to enter the correct number.(2) Press the OK button.3. Return to the fax standby screen.(1) Press the FAX button.Page topPage 26 of 817 pagesEntering the Date and Time
