Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > ScanSettings Dialog BoxScan Settings Dialog BoxMake advanced settings for scanning with one-click or scanning using the Operation Panel of themachine.The Scan Settings dialog box opens when you click Specify... in a dialog box for making scan settings.NoteThe displayed items vary by document type and how the screen was opened.Document TypeSelect the type of document to be scanned. When Auto Mode is selected, the document type isautomatically detected.In that case, Color Mode, Document Size, etc. are automatically set as well.ImportantTo scan correctly, select a document type that matches the document to be scanned.When opened from the Scanner Button Settings tab, the Document Type specified in the ScannerButton Settings tab is displayed and cannot be changed in this dialog box.Color ModeSelect how to scan the document.ColorThis mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).GrayscaleThis mode renders the image in 256 levels (8 bit) of black and white.Black and WhiteThis mode renders the image in black and white. The contrast in the image is divided at certainlevels (threshold level) into black and white and is rendered in two colors.NoteColor Mode is not displayed in the Scan Settings dialog box opened from the Scanner ButtonSettings tab.Document SizeSelect the size of the document to be scanned.When you select Custom, a screen in which you can specify the document size appears. Select aUnits, then enter the Width and Height and click OK.Page 463 of 817 pagesScan Settings Dialog Box
