Advanced Guide TroubleshootingContents > Setting Up the Machine > Setting the Receive ModeSetting the Receive ModeSelecting a Receive ModeThere are four receive modes as follows. Select a receive mode according to your needs.You receive mainly faxes and sometimes voice calls:Select Fax priority mode.You have a dedicated telephone line for fax use only:Select Fax only mode.You receive mainly voice calls and sometimes faxes:Select TEL priority mode.You have subscribed to a ring pattern detection service provided by yourtelephone company:Select DRPD *1 or Network switch *2 .*1 This setting is only available in US and Canada.*2 This setting may not be available depending on the country or region of purchase.NoteThe receiving operation procedure varies depending on the selected receive mode. For thereceiving method depending on each receive mode, see Receiving Faxes .If you want to use a single telephone line for faxes and voice calls, you need to connect atelephone or an answering machine to the External Device Jack of this machine.1. Display the Receive mode set.screen.(1) Press the FAX button, and press the Menu button.(2) Use the (-) or (+) button to select Receive mode set., and press the OKbutton.2. Select a receive mode.(1) Use the (-) or (+) button to select a receive mode, and press the OKbutton.The screen returns to the fax standby screen. The selected receive mode will appear on the LCD.You Receive Mainly Faxes and Sometimes Voice Calls:You want to receive faxes automatically (Fax priority mode).Page 33 of 817 pagesSetting the Receive Mode
