Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > PrintingPhotographs Directly from a Compliant Device > About PictBridge Print SettingsAbout PictBridge Print SettingsSettings on a PictBridge Compliant DeviceSettings on the MachineSettings on a PictBridge Compliant DeviceThis section describes the PictBridge function of the machine. For the print settings on aPictBridge compliant device, refer to the instructions given in the device's instruction manual.NoteIn the following description, names of setting items are given according to those used inCanon-brand PictBridge compliant devices. Setting item names may be different dependingon the brand or model of your device.Some setting items explained below may not be available on some devices. In this case, thesettings made on the machine are applied. Also, when some items are set to Default on aPictBridge compliant device, the machine settings for these items are applied.Settings on the MachineThe following settings can be used when printing from a PictBridge compliant device.Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/10.1 x 18 cm*2*1 10x15 may appear on some PictBridge compliant device.*2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.Paper type Default (Selections based on the machine setting)Photo:Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP-501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201Fast Photo:Photo Paper Pro II PR-201Plain:A4/LetterWhen Paper type is set to Plain, borderless printing will be disabled evenwhen Layout is set to Borderless.Layout Default (Selections based on the machine setting), Index, Bordered, Borderless,4-up** Layout compatible with A4/Letter sized paperPrint date &file no.Default (Off: No printing), Date, File No., Both, OffImageoptimizeDefault *1, On (Exif Print), Off, Face*2, Red-Eye*2*1 Photos are optimized for printing using the Photo optimizer pro function.*2 Can be selected only on certain Canon-brand PictBridge compliant devices.(May not be selected depending on the device.)Trimming Default (Off: No trimming), On (follow the camera's setting), OffSettings on the MachineYou can change the PictBridge print settings from the PictBridge settings screen. Set the printsettings to Default on the PictBridge compliant device when you want to print according to thesettings on the machine.This section describes the procedure to display the PictBridge settings screen. For setting items,see PictBridge settings .1. Make sure that the machine is turned on.2. Press the Menu button repeatedly until Device settings appears.Page 624 of 817 pagesAbout PictBridge Print Settings