Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Client PCSettings on Client PCAfter setting up the print server system, set up the client system.The procedure for setting up the client systems is as follows:In Windows Vista1. Install the printer driver on the client systemsTo install the driver, load the Setup CD-ROM that comes with the machine, and select CustomInstall.For details on connection instructions, refer to the "Install the Software" in the manual: GettingStarted.NoteDuring the installation, a screen prompting you to turn the printer on appears. Click ManualSelection and then select an appropriate port to complete your installation.2. Start the wizardSelect the Start menu -> Network -> Add a printer.The Add Printer window appears.3. Add a printerSelect Add a network, wireless or Bluetooth printer, and click the icon for the printer that you haveconfigured on the print server system to be shared, and then click Next.NoteIf the icon for the printer is not displayed, check that the printer is actually connected to the printserver.It may take some time for the icon for the printer to appear.4. Complete the setupTake the appropriate action as described on the screen and then click Finish.The icon for the shared printer will be created in the Printers window.This completes the setup on the client systems. You can now share the printer in the network.In Windows XP/Windows 20001. Install the printer driver on the client systemsTo install the driver, load the Setup CD-ROM that comes with the machine, and select CustomInstall.For details on connection instructions, refer to the "Install the Software" in the manual: GettingStarted.NoteDuring the installation, a screen prompting you to turn the printer on appears. Click ManualSelection and then select an appropriate port to complete your installation.2. Start the wizardIn Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware ->Printers and Faxes -> Add a printer.In Windows 2000, select the Start menu -> Settings -> Printers -> Add a printer.When Welcome to the Add Printer Wizard screen appears, click Next.Page 809 of 817 pagesSettings on Client PC
