Select a file format from JPEG, BMP, PNG and TIFF.Resolution (DPI)Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default.ResolutionBrightnessMove the slider to adjust the brightness. Move it to the left to darken and right to brighten theimage. You can also enter a value (-100 to 100).ContrastMove the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,thus softening the image. Moving it to the right will increase the contrast of the image, thussharpening the image. You can also enter a value (-100 to 100).Preview or scan images as separate filesSelect this checkbox to preview or scan multiple images as separate files.See how to scan a pictureClick to open Windows Help and Support.4. Click Preview to preview the image.The preview image appears on the right.5. Click Scan.When scanning is completed, the scanned image appears in the application.Scanning with WIA Driver 1.0The following is an example of scanning using Paint.1. Place the documents on the Platen or ADF (Auto Document Feeder).Placing Documents2. In File, click From Scanner or Camera.... (Select the command to scan a documentin the application.)3. Select an image type according to the document to be scanned.To scan from the Platen, select Flatbed for Paper source. To scan from the ADF (Auto DocumentFeeder), select Document Feeder.NoteTo scan with the values previously set in Adjust the quality of the scanned picture, selectCustom Settings.Selecting Document Feeder for Paper source enables you to select Page size.4. Click Adjust the quality of the scanned picture and set the preferences as required.Page 565 of 817 pagesScanning with WIA Driver
