Replacing the Printhead 6-19ImportantHow to Replace the PrintheadBefore replacing the printhead, you must first replace the two filtersprovided with the printhead package. To replace the printhead, you mustselect “Replace P.Head” from the “System Setup” menu and then follow theinstructions on the printer operation panel.• Remove printed and other media from the tray.• Clean the carriage rail and the paper restraint. (Æ P.6-13, P.6-15)• Replace the filters (Æ Instructions provided with the filters)• Execute “Replace P.Head” on the printer operation panel.• After ink has drained from the printhead, remove it.• Install the new printhead.z You must follow exactly the procedure below when you replace the printhead. Ifyou fail to follow procedure, the printhead may leak and stain the work area.1 Press the Power button to switch the printer on.After a few seconds “Online” is displayed in the operation panel and theOnline lamp lights.2 Press the Online button twice to display “MAIN MENU”.