Message Is Displayed 7-17Media Too SmallProblem 1: The loaded media is smaller than any media size allowed for loading in theprinter.Solution: Set the correct size media then try again. (ÆP.2-7, P.2-18)Media JamProblem 1: Media has jammed in the printer.Solution: Remove the jammed media then press the Online button. (Æ P.7-18)Incorrect MediaProblem 1: The media type specified by the printer driver does not match the value forthe media in the paper feed source.Solution: Confirm the type of media loaded in the printer, then select the media typewith the operation panel. (Æ P.2-17, P.2-24)Solution: Pause the print job, use the printer driver to correct the media type so itmatches the loaded media, the re-start the job.End of RollProblem 1: The roll media has run out.Solution: Load another roll in the roll media tray, then press the Online button.(Æ P.2-7)Load Roll MediaProblem 1: The printer is waiting for roll media be loaded in the roll media tray.Solution: Load the specified print media in the roll media tray and press the Onlinebutton. (Æ P.2-7)Remove Roll MediaProblem 1: The printer is waiting for removal of the roll media from the tray.Solution: Remove the printed roll media from the tray then press the Online button.
