Print Media You Can Use2-8CautionNote2 Press Paper Source to light the Roll Media lamp.Pressing Paper Source alternates the selection between Roll Media and CutSheet.Loading the Roll MediaFollow the procedure below to set the roll media in the roll media tray. Ifthere are any cut sheets or other paper output in the tray, remove them first.z If the W7250 is being used without the stand, to avoid tipping the printerover and damaging it or causing personal injury, never press down or leanon the roll media tray while it is pulled out of the printer.z Before changing to a larger media size, open the upper cover and clean the interiorof the printer to ensure that the entire platen is clean. (Æ P.6-11)z For more details about the type of roll media that can be loaded in the printer, referto Chapter 2 “Print Media That Can Be Used”. (Æ P.2-2)