Print Media You Can Use2-18ImportantNoteLoading Cut SheetsThis is the general procedure for loading cut sheets.• Remove all printed roll media or cut sheets from the tray.• On the operation panel, select the cut sheet source. (Æ P.2-18)• Load the cut sheet on the tray. (Æ P.2-20)• On the operation panel, select the Cut Sheet Type. (Æ P.2-22)• Adjust the amount of media feed. (Æ P.7-36)• Start the print job on the computer. (Æ P.3-2, P.4-2)z Store unused cut sheets in the original package. Store the package in a cool, drylocation that is not exposed to direct sunlight.z When the printer is set up with the stand, simply pressing Paper Source on theoperation panel alternately selects Roll Media or Cut Sheet. If you select Cut Sheetby pressing Paper Source, the roll media source automatically moves to the printstandby position so the cut sheet can be set for printing. After the cut sheet isprinted, the printer automatically returns to the Roll Media selection for printing.Selecting the Cut Sheet SourceUse the Paper Source button on the operation panel to set the printer forprinting on cut sheets.1 Press the Online button to display “Offline”.
