Loading Roll Media 2-11Important6 Insert the holder stopper completely into the left end of the roll holderuntil it stops.The roll media is locked in place by the roll holder.7 Position the roll media as shown in the illustration, align the left andright ends of the roll holder with the grooves at either end of the rollmedia tray, then set the roll media in the tray.If the roll media has unrolled, turn the roll as you set it.z When holding the roll holder, grip it by the ring. To avoid personal injury, do nothold it by the shaft.z While holding the roll holder, avoid touching the media anywhere other than theleading edge of the media. If you touch the surface of the media on the print side,this could cause poor printing.
