Troubleshooting7-12Problem 2: Colors in the printout do not match the colors on the screen.Solution: Perform monitor color correction. (Æ Monitor Instructions)Solution: The color management setting in the software application is not setcorrectly. For details, see your software application manual.Problem 3: Color ink is running low.Solution: Check the level of the ink in the tanks and replace a tank if it is nearlyempty. (Æ P.6-2)Problem 4: Not enough ink is being supplied to the printhead.Solution: On the printer operation panel, perform Head Cleaning B. (Æ P.7-31)Problem 5: A color ink tank is inserted in the wrong slot.Solution: On the printer operation panel, select “Move Printer”. Remove the inktank from the printer, then insert the correct color ink tank. (Æ SetupGuide)Solution: After doing the above procedure, execute “Nozzle Check”. If each color isnot printing correctly, on the printer operation panel execute “HeadCleaning B”. (Æ P.7-29, P.7-31)Image Color Borders Printing DarkProblem 1: Ink is clogged in a nozzle.Solution: Open the printer driver, click the Device Settings tab then select SSCAdjustment. If the Level 1 setting is not satisfactory, select Level 2 thentry again. However, using this feature could change the hues of the overallimage, so watch carefully the affects of the changes on the hues in theprinted image.Other ProblemsInk consumption is exceedingly high.Problem 1: Printing a color image over a large printing area.Solution: Printing a photograph or other large image consumes a large amount ofink. This is not abnormal.